Sheartak Spiral Cutterhead for Felder Combination Machine CF 741 S Professional is installed with 85 carbide inserts on 5 spirals. The inserts are angled to the feeding for a superior quality cut finish, without tear-out. Operation noise is hugely reduced due to the staggered cut. Each insert has four round edges and the life use of the blades is 50 times that of the HSS blade. Dust extraction becomes much easier as the Sheartak spiral cutterhead cut thin and short chips. No clogs happen at the extracted port even if your dust collection system is not powerful. Sheartak carbide inserts are precision
Sheartak Cutterhead Kit includes:
* High tensile strength alloy steel cutter block.
* 85 carbide inserts installed on 4 helical.
* 5 extra carbide inserts & 5 extra screws free as spare parts.
* 1 Wrench
Ask Question About Product
| Technical | |
| Material of Cutterblock | Alloy Steel |
| No. of Spirals | 5 |
| No. of Carbide Inserts | 85 |
| Carbide Insert Size | 15x15x2.5mm R150 30° |
| Screw Size | T20 M6 |
| Standard Kit | |
| No. of Additional Knives | 5 |
| No. of Additional Screws | 5 |
| No. of Wrenches | 1 |
