Surfboard Planning Drum for Skil Model 100H Type 1 Plane 3 inch 4 spirals

CAD$200.00 Price drop reminder
  • Brand: Sheartak
  • Product Code: S01427
  • Availability: In Stock
  • Promotion:
    Full reduction Up to CAD$300.00 discount 8%

- +
Total CAD$200.00

Sheartak Spiral Cutterhead for Skil 100 planer, the most favorite tool for Surfboard shapers. 

* Smoother Finish with no tear-out. Each knife sits at a slight angle and it produces a shear cut. Spiral cutterhead planes board in a staggered way which is much better than a single straight cut. The combined shear and staggered cut eliminates tear-out and leaves a glossy surface finish on even highly figured hardwood.* Noise is dramatically reduced as the spiral cutterhead allows a few knives to cut in a staggered way.* More than 10 times the life use of high-speed steel. The 15x15x2.5mm inserts are made of sintered tungsten carbide which is much harder than high-speed steel. Each insert has four edges.* Easy to change. The knives are precision ground to a tolerance of +/-0.0004" or +/-0.01mm and are interchangeable. Loosen the screw, rotate 90° for a new edge, and tighten the insert in minutes. It cuts your production time by 30%.* Dust extraction is easier. The spiral cutterhead produces thinner and shorter chips.* Low cost to use. Spiral cutterheads produce a smoother finish, reduce or eliminate sanding work, and don't require sharpening, your product will pay for itself in a very short time. Spiral Cutterhead specifications:* High tensile alloy steel shaft for long durability. * Aluminum cutter block reduces overheating resulting from the weight. * 14 pcs of Tungsten carbide insert knives installed.* Zero-out design Kit includes:(5) extra knives as spare parts(5) extra screws(1) Torx-headed wrench.(2) bearings

Ask Question About Product

Note: HTML is not translated!
Technical
Material of CutterblockHard Aluminum
No. of Spirals4
No. of Carbide Inserts14PCS
Carbide Insert Size15x15x2.5mm R150 30°
Screw SizeT25 10#-32TPI
Standard Kit
No. of Additional Knives5
No. of Additional Screws5
No. of Wrenches1
No. of Bearings2
  • All(0)
  • Good(0)
  • Fair(0)
  • Poor(0)
  • Image(0)
Note: HTML is not translated!
    Bad           Good
If the price of the product is reduced within 30 days, we will notify you via email, SMS and mobile client~
Notify you when the item is below the price
Mobile phone number
Email address
If the goods arrive within 30 days, we will notify you via email, SMS and mobile client~
Mobile phone number
Email address
Checkin successfully
Get bonus points:
My Points
Signed in Day
Checkin Record
Time Points Detailed description