Spiral Cutterhead for Metabo DH330 Bench Thicknesser OEM size

CAD$545.00 Price drop reminder
  • Brand: Sheartak
  • Product Code: S01294
  • Availability: In Stock
  • Promotion:
    Full reduction Up to CAD$300.00 discount 8%

- +
Total CAD$545.00

Spiral Cutterhead for Metabo  DH330 Bench Thicknesser OEM size with 40 caribide cutters

 

Woodworkers are now retrofitting spiral cutter heads to their old planers, and jointers for the following advantages.

 

* Smoother Finish with no tear-out. Each knife sits at a slight angle and it produces a shear cut. Spiral cutter head planes board in a staggered cut which is much better than a single straight cut. The combined shear and staggered cut eliminates tear-out and leaves a glossy surface finish on even highly figured hardwood.

* Noise is hugely reduced as the spiral cutter head allows a few knives to cut in a staggered way.

* More than 10 times the life use of high-speed steel. The 15x15x2.5mm inserts are made of sintered tungsten carbide which is much harder than high-speed steel. Each insert has four edges.

* Easy to change. The knives are precision ground to a tolerance of +/-0.0004" or +/-0.01mm and are interchangeable. Loosen the screw, rotate 90° for a new edge, and tighten the insert in minutes.

* Dust extraction is easier. The spiral cutter head produces thinner and shorter chips.

 

* Low cost to use. Spiral cutter heads produce a smooth finish, reduce or eliminate sanding work, don't require sharpening, the product will pay for itself in a very short time.

 Spiral Cutterhead Kit includes:

* High tensile strength alloy steel cutter block.

* 40 carbide inserts to be installed.

* 5 extra carbide inserts & 5 extra screws free as spare parts.

* A pair of premium sealed bearings premounted.

* 1 Wrench  

 

The cutting circle of version is close to that of the original cutterhead with HSS blade.  We name it OEM version. The carbide inserts are removed after dynamic balance is completed. After the cutterblock is placed into the planer, install the 40 carbide inserts to the cutterblock. You can cut up to 1/8" per pass maximum. Disadvantage is that you will have to spend half an hour or so to install all the carbide inserts to the cutterblock. 

 Follow the followings steps when you install the carbide inserts.  

https://www.sheartak.com/shearcut.pdf

https://sheartak.com/video/spiralcutterhead.mp4

Ask Question About Product

Note: HTML is not translated!
Technical
Material of CutterblockAlloy Steel
No. of Spirals4
No. of Carbide Inserts40pcs
Carbide Insert Size15x15x2.5mm R150 30°
Screw SizeT25 10#-32TPI
Standard Kit
No. of Additional Knives5
No. of Additional Screws5
No. of Wrenches1
No. of Bearings2
  • All(8)
  • Good(8)
  • Fair(0)
  • Poor(0)
  • Image(0)
Note: HTML is not translated!
    Bad           Good

 

 

If the price of the product is reduced within 30 days, we will notify you via email, SMS and mobile client~
Notify you when the item is below the price
Mobile phone number
Email address
If the goods arrive within 30 days, we will notify you via email, SMS and mobile client~
Mobile phone number
Email address
Checkin successfully
Get bonus points:
My Points
Signed in Day
Checkin Record
Time Points Detailed description