Mettez à niveau votre dégauchisseuse-raboteuse Rikon 25-210 12" avec un porte-outil hélicoïdal Sheartak et profitez de ces avantages clés :
✅ Fini plus lisse sans arrachement – Chaque couteau est incliné pour créer une coupe en biais, tandis que l'action de coupe décalée assure une surface impeccable et brillante, même sur les bois durs très figurés.
✅ Réduction significative du bruit – Le motif de coupe décalé réduit les niveaux de bruit, rendant votre atelier plus silencieux.
✅ Durée de vie prolongée de la lame – Les inserts en carbure de tungstène de 15x15x2,5 mm durent plus de 10 fois plus longtemps que l'acier rapide. Chaque insert a quatre arêtes de coupe pour une durabilité maximale.
✅ Remplacement rapide et facile de la lame – Les inserts rectifiés avec précision (tolérance de +/-0,01 mm) sont entièrement interchangeables. Il suffit de desserrer la vis, de la tourner à 90° et de la serrer – aucun affûtage n'est nécessaire.
✅ Amélioration de l'extraction de la poussière – Le porte-outil en spirale produit des copeaux plus petits et plus fins, ce qui rend la collecte de la poussière plus efficace.
✅ Solution économique – La finition lisse réduit ou élimine le ponçage. Sans affûtage requis, le porte-outil se rentabilise rapidement.
Le kit de porte-outil Sheartak comprend :
✔ Bloc de coupe en acier allié à haute résistance
✔ 56 inserts en carbure préinstallés sur 4 rangées hélicoïdales
✔ 5 inserts en carbure supplémentaires et 5 vis de rechange
✔ 1 clé pour un entretien facile
Mettez à niveau votre dégauchisseuse-raboteuse Rikon 25-210 dès aujourd'hui pour des performances supérieures !
Do I need to replace the original bearings?
If the bearings in your machine are in good condition, they can be reused by carefully removing them with a bearing or pulley puller. However, if the bearings are tightly pressed onto the shaft, removal may cause damage. To minimize this risk, we recommend replacing old bearings with our greased and sealed bearings, designed for long-lasting performance. For a smooth upgrade, we suggest adding the bearings to your shopping cart before completing your purchase.
We provide premium bearings from NSK, SKF, NTN, FAG, Timken. They are renowned for their high quality and performance, designed to provide durability and reliability in various applications
Do I need to to Add a Few Boxes of Carbide Inserts
We provide 5 carbide inserts and 5 screws as spare parts. However, many of our customers choose to purchase additional boxes, as the shipping costs for separate purchases can make it less economical.
Do I need a Torque Wrench?
To securely lock the carbide inserts, we recommend applying a torque of 48 to 52 Pound-Inches (or 5.42 to 5.88 Newton-Meters). (Note: 1 Newton-Meter is equal to 8.851 Pound-Inches, and 1 Pound-Inch is approximately 0.113 Newton-Meters.) It is crucial not to apply excessive torque, as this could cause the carbide inserts to crack or explode. On the other hand, using too little torque may result in the inserts not being properly secured, which could lead to cracks, shattering, or uneven height on the cutter block, causing ridges or lines on the board.
If one person is responsible for maintaining the machine, they can typically apply the same torque consistently without a torque wrench. However, when multiple people are involved in machine maintenance, ensuring uniform torque application can be challenging. For consistency and peace of mind, we recommend using a torque wrench.
What kind of steel the cutter block is made of?
The cutter block is constructed using GB/T 40Cr, a structural alloy steel of the same caliber as ASTM grade 5140, AISI 5140, SAE 5140, DIN 41Cr4, BS 41Cr4, JIS SCr440, and EN 41Cr4.The primary components of this steel are as follows: carbon (C) at a range of 0.37-0.44%, silicon (Si) between 0.17-0.37%, manganese (Mn) within 0.50-0.80%, and chromium (Cr) from 0.80-1.10%.
In terms of physical properties, this steel exhibits a tensile strength range of 115-234σb/MPa, a yield strength of 2σ 0.2 ≥/MPa, and an elongation capacity of 65 δ5≥ (%). It also has a HBS range of 123-321 and a HRC rating of 30.
This alloy steel is frequently utilized in low to moderately stressed components for machines, engines, and vehicles.
