Améliorez votre raboteuse automatique Winner CM-508Y 20" avec un porte-lames hélicoïdal Sheartak
Libérez tout le potentiel de votre raboteuse avec le porte-lames hélicoïdal de précision Sheartak.
-
Finition supérieure – Obtenez une coupe franche pour une finition de surface lisse et brillante qui surpasse les autres porte-lames hélicoïdaux.
-
Inserts Premium – Équipé d'inserts en carbure de tungstène de haute qualité, chacun doté de quatre arêtes de coupe pour une précision constante.
-
Performance durable – Les couteaux en carbure durent 8 à 10 fois plus longtemps que les lames HSS conventionnelles.
-
Entretien rapide et facile – Oubliez l'affûtage; faites simplement pivoter chaque insert à 90° pour révéler un nouveau tranchant en quelques secondes.
-
Fonctionnement plus silencieux – Un bruit considérablement réduit crée un environnement de travail plus confortable.
-
Collecte de poussière efficace – Des copeaux de bois plus petits signifient des coupes plus nettes et un nettoyage plus facile.
Les porte-lames hélicoïdaux Sheartak sont conçus pour la durabilité, l'efficacité et des résultats exceptionnels, offrant à votre Winner CM-508Y la mise à niveau qu'elle mérite.
Le kit comprend :
* Un jeu complet d'inserts en carbure installés.
* 5 inserts en carbure supplémentaires
* 5 vis Torx supplémentaires
* 1 clé en T
Do I need to replace the original bearings?
If the bearings in your machine are in good condition, they can be reused by carefully removing them with a bearing or pulley puller. However, if the bearings are tightly pressed onto the shaft, removal may cause damage. To minimize this risk, we recommend replacing old bearings with our greased and sealed bearings, designed for long-lasting performance. For a smooth upgrade, we suggest adding the bearings to your shopping cart before completing your purchase.
We provide premium bearings from NSK, SKF, NTN, FAG, Timken. They are renowned for their high quality and performance, designed to provide durability and reliability in various applications
Do I need to to Add a Few Boxes of Carbide Inserts
We provide 5 carbide inserts and 5 screws as spare parts. However, many of our customers choose to purchase additional boxes, as the shipping costs for separate purchases can make it less economical.
Do I need a Torque Wrench?
To securely lock the carbide inserts, we recommend applying a torque of 48 to 52 Pound-Inches (or 5.42 to 5.88 Newton-Meters). (Note: 1 Newton-Meter is equal to 8.851 Pound-Inches, and 1 Pound-Inch is approximately 0.113 Newton-Meters.) It is crucial not to apply excessive torque, as this could cause the carbide inserts to crack or explode. On the other hand, using too little torque may result in the inserts not being properly secured, which could lead to cracks, shattering, or uneven height on the cutter block, causing ridges or lines on the board.
If one person is responsible for maintaining the machine, they can typically apply the same torque consistently without a torque wrench. However, when multiple people are involved in machine maintenance, ensuring uniform torque application can be challenging. For consistency and peace of mind, we recommend using a torque wrench.
What kind of steel the cutter block is made of?
The cutter block is constructed using GB/T 40Cr, a structural alloy steel of the same caliber as ASTM grade 5140, AISI 5140, SAE 5140, DIN 41Cr4, BS 41Cr4, JIS SCr440, and EN 41Cr4.The primary components of this steel are as follows: carbon (C) at a range of 0.37-0.44%, silicon (Si) between 0.17-0.37%, manganese (Mn) within 0.50-0.80%, and chromium (Cr) from 0.80-1.10%.
In terms of physical properties, this steel exhibits a tensile strength range of 115-234σb/MPa, a yield strength of 2σ 0.2 ≥/MPa, and an elongation capacity of 65 δ5≥ (%). It also has a HBS range of 123-321 and a HRC rating of 30.
This alloy steel is frequently utilized in low to moderately stressed components for machines, engines, and vehicles.
