Passer au contenu
📞 Tel: +1-519-880-8181 (International) | Toll-Free (Canada & USA): 1-877-417-4327
📞 Tel: +1-519-880-8181 (International) | Toll-Free (Canada & USA): 1-877-417-4327
Mon compte Toutes les collections Chariot Dealers Wish List Testmonials Blogs
Fully Universal Dividing Heads - Sheartak Tools

Têtes de division universelles

par Sheartak
Disponibilité:
Rupture de stock
Disponibilité:
Rupture de stock
Disponibilité:
Rupture de stock
Disponibilité:
Rupture de stock
UGC 410-0407
Épuisé
$1,200.00 - $1,200.00
$1,200.00
$1,200.00 - $1,200.00
$1,200.00
Hauteur centrale: 80mm
Request a quote
Cancellation policy

Cancel for any reason at any time until your order shipped. Please be aware that banks charge for each payment transaction, so we will deduct these fees from the refunded amount. Once your order has shipped, you may return your order. For details, please review our Returns and Cancellations policies. Special order items may not be eligible for cancellation.

Return Policy

Most items can be returned within 30 days of receipt for a refund of the product cost less return shipping. Shipping, duties, and taxes are not refundable. For details, please review our Returns and Cancellations policies.

International Shipping

The product price and shipping and handling cost do not include import duties, taxes, or brokerage fees. As the transportation fee for your order is the only fee we charge, it is the buyer's responsibility to pay for these charges. We recommend that you contact your country's customs office or visit their website to determine if there will be any additional costs.

The Harmonized Tariff Schedule (HS code) for spiral cutterheads and other woodworking tools is 8466.92.50.10.

California Proposition 65

Caractéristiques:

  • La tête de division universelle est l'un des accessoires les plus importants pour couper des cannelures, des engrenages droits, des engrenages hélicoïdaux, des cannelures hélicoïdales, des cames d'Archimède et des cannelures hélicoïdales sur les fraiseuses.
  • Ils font pivoter les pièces maintenues entre les centres ou sur un mandrin de tour à n'importe quel angle souhaité et la circonférence d'une pièce peut être divisée en toutes divisions de parties égales.
  • Les pièces à usiner peuvent être montées sur la plaque frontale pour une coupe multi-positions.

Accessoires standards:

  • Contre-pointe.
  • Jack.
  • Centre solide.
  • Transporteur.
  • Plaque de séparation.
  • Adaptateur pour mandrin de tour.
  • Mandrin à 3 mors.
  • La façade est facultative.
N ° de commande. 410-0407 410-0408 410-0409 410-0410
Hauteur centrale (mm) 80 100 125 160
Dia. du cône du nez de broche (mm) 36.541 41.275 53.975 53.975
Largeur de la clé de positionnement (mm) 14 14 18 18
Angle de pivotement vers le haut de la broche à partir de son Hor. Position 0~6° 0~5° 0~5° 0~5°
Angle de pivotement vers le bas de la broche à partir de son Hor. Position 0~90° 0~95° 0~95° 0~95°
Rapport d'engrenage à vis sans fin 1h40 1h40 1h40 1h40
Cône de l'alésage de la broche 3MT 3MT 4MT 4MT
Min. lecture du vernier dix" dix" dix" dix"
Angle de rotation de la broche par tour de poignée de division 9° 9° 9° 9°
Erreur d'index pour un tour complet de la poignée de division 60" +/-45” +/-45” +/-45”
Erreur cumulative à 1/4" sur toute périphérie de 1/4" de la broche +/-1 minute +/-1 minute +/-1 minute +/-1 minute
Max. portant (Kg) 80 100 130 130
Trous de la plaque d'indexation côté I 24,25,28,30,34,37,38,39,41,42,43 24,25,28,30,34,37,38,39,41,42,43 24,25,28,30,34,37,38,39,41,42,43 24,25,28,30,34,37,38,39,41,42,43
Trous de la plaque d'indexation côté II 46,47,49,51,53,54,57,58,59,62,66 46,47,49,51,53,54,57,58,59,62,66 46,47,49,51,53,54,57,58,59,62,66 46,47,49,51,53,54,57,58,59,62,66
Module de changement de vitesse 1,5 1,5 2 2
Changer les numéros de dents des engrenages 25,30,35,40,50,55,0,70,80,90,100 25,30,35,40,50,55,0,70,80,90,100 25,30,35,40,50,55,0,70,80,90,100 25,30,35,40,50,55,0,70,80,90,100
Poids net / kg) 36 67 86 130
Poids brut (kg) 42 79 126 149
Dimensions du boîtier (mm) 542x403x220 616x465x265 635x530x310 710x535x342

Do I need to replace the original bearings?
If the bearings in your machine are in good condition, they can be reused by carefully removing them with a bearing or pulley puller. However, if the bearings are tightly pressed onto the shaft, removal may cause damage. To minimize this risk, we recommend replacing old bearings with our greased and sealed bearings, designed for long-lasting performance. For a smooth upgrade, we suggest adding the bearings to your shopping cart before completing your purchase.
We provide premium bearings from NSK, SKF, NTN, FAG, Timken. They are renowned for their high quality and performance, designed to provide durability and reliability in various applications

Do I need to to Add a Few Boxes of Carbide Inserts
We provide 5 carbide inserts and 5 screws as spare parts. However, many of our customers choose to purchase additional boxes, as the shipping costs for separate purchases can make it less economical.

Do I need a Torque Wrench?
To securely lock the carbide inserts, we recommend applying a torque of 48 to 52 Pound-Inches (or 5.42 to 5.88 Newton-Meters). (Note: 1 Newton-Meter is equal to 8.851 Pound-Inches, and 1 Pound-Inch is approximately 0.113 Newton-Meters.) It is crucial not to apply excessive torque, as this could cause the carbide inserts to crack or explode. On the other hand, using too little torque may result in the inserts not being properly secured, which could lead to cracks, shattering, or uneven height on the cutter block, causing ridges or lines on the board.
If one person is responsible for maintaining the machine, they can typically apply the same torque consistently without a torque wrench. However, when multiple people are involved in machine maintenance, ensuring uniform torque application can be challenging. For consistency and peace of mind, we recommend using a torque wrench.

What kind of steel the cutter block is made of?
The cutter block is constructed using GB/T 40Cr, a structural alloy steel of the same caliber as ASTM grade 5140, AISI 5140, SAE 5140, DIN 41Cr4, BS 41Cr4, JIS SCr440, and EN 41Cr4.The primary components of this steel are as follows: carbon (C) at a range of 0.37-0.44%, silicon (Si) between 0.17-0.37%, manganese (Mn) within 0.50-0.80%, and chromium (Cr) from 0.80-1.10%.
In terms of physical properties, this steel exhibits a tensile strength range of 115-234σb/MPa, a yield strength of 2σ 0.2 ≥/MPa, and an elongation capacity of 65 δ5≥ (%). It also has a HBS range of 123-321 and a HRC rating of 30.
This alloy steel is frequently utilized in low to moderately stressed components for machines, engines, and vehicles.