The Spiral Cutter head for Mophorn MB1931 Thickness Planer 12.5Inch Thickness Planer is equipped with 40 carbide inserts. Each carbide insert has 4 indexable edges. The carbide inserts are slightly angled to the board feeding, which generates a shear cut, eliminates tear-out, and leaves a better quality surface finish on softwood, highly figured hardwood. It dramatically reduces operation noise. Simply rotate the insert quarter circle if one edge is dull or nicked. You will have a new sharp edge. Discard the inexpensive carbide inserts only when all four edges are affected. No need to sharpen these inexpensive inserts. This greatly reduces downtime. Sheartak spiral cutter heads reduce three-quarters of your sanding work and consume less power. Spiral cutter heads remove short chips in a staggered way and avoid dust clog at the hood port. Dust extraction is significantly improved. Sheartak spiral cutter heads can pay back your initial investment in no time.
Spiral Cutterhead Kit includes:
* High tensile strength alloy steel cutter block.
* 40 carbide inserts installed.
* 5 extra carbide inserts & 5 extra screws free as spare parts.
* A pair of premium sealed bearings.
* 1 Wrench
Ask Question About Product
| Technical | |
| Material of Cutterblock | Alloy Steel |
| No. of Spirals | 4 |
| No. of Carbide Inserts | 40pcs |
| Carbide Insert Size | 15x15x2.5mm R150 30° |
| Screw Size | T25 10#-32TPI |
| Standard Kit | |
| No. of Additional Knives | 5 |
| No. of Additional Screws | 5 |
| No. of Wrenches | 1 |
| No. of Bearings | 2 |
