Sheartak Spiral Cutter head for JET JWP-15HO 15-inch Planer comes with a total of 80 carbide inserts on 5 spirals. 5 extra carbide inserts and 5 screws are provided as spare parts.
Two Japan-made NSK premium sealed bearings are provided. The path on the pulley side is pre-installed onto the shaft. The path at the idol end is included and has to be mounted while placing this end into the gearbox.
A new TC-type oil seal for the gearbox is also included. This oil seal is to avoid oil leakage from the gearbox.
We ship by Canada Post, USPS, and UPS.
Each carbide insert bears the same kickback force and shares the same amount of material removal. To cut the same material at the same cutting parameters, the life span of carbide inserts on more-insert cutterhead is longer than on fewer-insert cutterheads. We install 80 carbide inserts on this 15" planer. The same cutterheads from other suppliers install only 75 inserts on 5 spirals or even 68 inserts on 4 spirals. Sheartak cutterhead is more productive or value effective compared with those cutterhead. Call us at our Toll-Free number 187741-SHEAR (18774174327) for more information.
Sheartak spiral cutterhead leaves a superior surface finish over straight-edge cutterheads. The round-edged inserts are angled for a shear-cut that leaves a smooth glassy cut even on highly figured woods or very soft wood. Each insert has four cutting edges and can be rotated up to 3 times to reveal a fresh sharp edge. No more sharpening and resetting when an insert gets dull or nicked. Carbide inserts stay sharp 50 times longer than HSS blades. Dust extraction is much easier with the shorter and thinner chips cut by Sheartak spiral cutterheads.
All our cutterheads are warranted one year from the date of purchase, which covers parts and assures it is free from manufacturer defects. ( Consumables are not covered)
Specifications
Material of Cutterblock: AISI 5140 high tensile strength alloy steel
Material of insert: Grade C3++.
Carbide insert size: 15x15x2.5mm
Number of inserts: 80
Number of rows: 5
Wrench size: Torx head T25
Screw size: 10#-32TPI
Kit includes:
(1) set of bearings
(1) Oil seal
(1) T-25 T-handle wrench
(5) additional inserts
(5) 5 Torx screws
Ask Question About Product
| Technical | |
| Material of Cutterblock | Alloy Steel |
| No. of Spirals | 5 |
| No. of Carbide Inserts | 80 |
| Carbide Insert Size | 15x15x2.5mm R150 30° |
| Screw Size | T25 10#-32TPI |
| Standard Kit | |
| No. of Additional Knives | 5 |
| No. of Additional Screws | 5 |
| No. of Wrenches | 1 |
