Square Knives

The carbide insert knives (usually referred to as ICK) are made to the US Grade C3 or ISO K10 with a bending strength of 2350PSI. They are precisio...

15x15x2.5 mm Square Carbide Insert Knife with a 37 Degree Bevel Length: 15 mm Width: 15 mm Thickness: 2.5 mm Bevel Angle: 37 degrees Cutting E...

Magnum (KMS Tools) MI-99300 blades are made of high-speed steel, while Sheartak carbide cutters offer superior durability. Each carbide edge remain...

WEN BP510H blades are made of high-speed steel, while Sheartak carbide cutters offer superior durability. Each carbide edge remains sharp up to 10 ...

The carbide insert knives (usually referred to as ICK) are made to the US Grade C3 or ISO K10 with a bending strength of 2350PSI. They are precisio...

Replacement Indexable Carbide Insert 14x14x2mm - 10 Pack Compatible with Grizzly H7319 Keep your Grizzly woodworking tools performing at their best...

The indexable carbide inserts have four R150 round cutting edges. They sit on a spiral cutter head at a slight angle to the feeding of the board an...

King Canada KW-204 blades are made of high-speed steel, while Sheartak carbide cutters offer superior durability. Each carbide edge remains sharp u...

Sheartak Carbide Inserts 14.3x14.3x2mm – Compatible with Craftex CXHCINS2 for CX125HC, CX08BTHC, and CX13HC Sheartak carbide inserts (14.3x14.3x2mm...

Replacement of Dimar Tungsten Carbide Indexable Insert 14x14x2mm, 10 piece a Pack. If one edge is dull or chipped rotate it 90 degrees to reveal a ...

15x15x2.5mm 150mm-Radius 4-Edge Carbide Insert Knife 37° for Softwood Length: 15 mm Width: 15 mm Thickness: 2.5 mm Edge Radius: 150 mm Sharp E...

For spiral cutterheads of shearcutMade of Carbide TunsgensSquare 14.6x14.6mm but with Round edge of R150.Precision ground to +/- 0.01mm or +/-0.000...

Tigra Carbide Insert 14x14x2mm  Sharp corners. If one edge is dull or chipped rotate it 90 degrees to reveal a new edge. No need to sharpen these i...

Tigra Carbide Inserts  15x15x2.5mm R150 Round Edge Sharp Corners. They sit on a spiral cutter head at a slight angle to the feeding of the board an...

Reversible Square Carbide Insert Length: 13 mm Width: 13 mm Thickness: 2.5 mm Bevel Angle: 30 degrees Hole: M6 Countersunk   USA C3 or ISO K...

12x12x1.5mm Square Carbide Insert Knife with Four Sharp Edges Length: 12 mm Width: 12 mm Thickness: 1.5 mm Sharp Edges: 4 Bevel Angle: 30 degr...

14.6x14.6x2.5 mm Square Carbide Insert Knife with Four Sharp Edges  Length: 14.6 mm Width: 14.6 mm Thickness: 2.5 mm Sharp Edges: 4  Bevel Ang...

14.6x14.6x2.5mm Square Carbide Insert Knife with Four Cutting Edges Length: 14.6 mm Width: 14.6 mm Thickness: 2.5 mm Bevel Angle: 30 degrees C...

14x14x2mm Square Carbide Insert Knife with Four Cutting Edges Length: 14 mm Width: 14 mm Thickness: 2 mm Bevel Angle: 30 degrees Cutting Edges...