Upgrade DELTA 20'' Planer 22-451 with Sheartak Helical Head 100 Inserts on 5 Spirals
The Sheartak spiral cutterhead for the DELTA 20" Planer 22-451 is designed for superior performance, featuring 100 carbide inserts—each with four indexable edges. The inserts are slightly angled to the feed direction, creating a shear cut that minimizes tear-out and enhances surface quality on both softwood and highly figured hardwood. Additionally, it significantly reduces operational noise.
When an edge becomes dull or nicked, simply rotate the insert by a quarter turn to expose a fresh, sharp edge. You only need to replace the inserts once all four edges are worn—no sharpening required, reducing maintenance time and costs.
Sheartak spiral cutterheads can cut sanding time by up to 75% and improve energy efficiency. Their staggered cutting action produces short chips that prevent clogging at the hood port, enhancing dust extraction for a cleaner workspace. With these benefits, your investment in a Sheartak spiral cutterhead pays off quickly.
Sheartak Cutterhead Kit Includes:
- High-tensile alloy steel cutter block
- 100 carbide inserts pre-installed on four helical rows
- 5 extra carbide inserts & 5 extra screws as spare parts
- 1 wrench
Do I need to replace the original bearings?
If the bearings in your machine are in good condition, they can be reused by carefully removing them with a bearing or pulley puller. However, if the bearings are tightly pressed onto the shaft, removal may cause damage. To minimize this risk, we recommend replacing old bearings with our greased and sealed bearings, designed for long-lasting performance. For a smooth upgrade, we suggest adding the bearings to your shopping cart before completing your purchase.
We provide premium bearings from NSK, SKF, NTN, FAG, Timken. They are renowned for their high quality and performance, designed to provide durability and reliability in various applications
If you add the bearings to your order, we will preinstall them for you when premounting is possible, saving you the hassle of doing it yourself.
Do I need to to Add a Few Boxes of Carbide Inserts
We provide 5 carbide inserts and 5 screws as spare parts. However, many of our customers choose to purchase additional boxes, as the shipping costs for separate purchases can make it less economical.
Do I need a Torque Wrench?
To securely lock the carbide inserts, we recommend applying a torque of 48 to 52 Pound-Inches (or 5.42 to 5.88 Newton-Meters). (Note: 1 Newton-Meter is equal to 8.851 Pound-Inches, and 1 Pound-Inch is approximately 0.113 Newton-Meters.) It is crucial not to apply excessive torque, as this could cause the carbide inserts to crack or explode. On the other hand, using too little torque may result in the inserts not being properly secured, which could lead to cracks, shattering, or uneven height on the cutter block, causing ridges or lines on the board.
If one person is responsible for maintaining the machine, they can typically apply the same torque consistently without a torque wrench. However, when multiple people are involved in machine maintenance, ensuring uniform torque application can be challenging. For consistency and peace of mind, we recommend using a torque wrench.
What kind of steel the cutter block is made of?
The cutter block is constructed using GB/T 40Cr, a structural alloy steel of the same caliber as ASTM grade 5140, AISI 5140, SAE 5140, DIN 41Cr4, BS 41Cr4, JIS SCr440, and EN 41Cr4.The primary components of this steel are as follows: carbon (C) at a range of 0.37-0.44%, silicon (Si) between 0.17-0.37%, manganese (Mn) within 0.50-0.80%, and chromium (Cr) from 0.80-1.10%.
In terms of physical properties, this steel exhibits a tensile strength range of 115-234σb/MPa, a yield strength of 2σ 0.2 ≥/MPa, and an elongation capacity of 65 δ5≥ (%). It also has a HBS range of 123-321 and a HRC rating of 30.
This alloy steel is frequently utilized in low to moderately stressed components for machines, engines, and vehicles.
