Upgrade your SAC 12" Jointer F 305 with Sheartak spiral cutterheads to enjoy a host of benefits. With 78 carbide inserts situated along six spirals, each boasting four indexable edges, the cutterhead is designed to produce a shear cut that eliminates tear-out, leaving behind a glossy surface finish on softwood, hardwood, and man-made board. The carbide inserts are also slightly angled to the board feeding, further enhancing the quality of the cut. Noise levels are significantly reduced during operation, and when a carbide insert is dull or chipped, simply rotate it 90 degrees to expose a new, sharp edge. Inexpensive and disposable, these carbide inserts only need to be replaced when all four edges have been affected, eliminating the need for sharpening and reducing downtime. Sheartak spiral cutterheads can also help to reduce sanding work by up to three-quarters and consume less power, while their staggered chip removal ensures dust extraction is significantly improved, avoiding clogs at the hood port. Investing in Sheartak spiral cutterheads can quickly pay for itself with the savings you'll enjoy in reduced maintenance and increased efficiency.
Spiral Cutterhead Kit includes:
* High tensile strength alloy steel cutter block.
* 78 carbide inserts installed.
* 5 extra carbide inserts.
* 5 extra screws.
* 1 Wrench
* 1-year warranty for cutter block.
Do I need to replace the original bearings?
If the bearings in your machine are in good condition, they can be reused by carefully removing them with a bearing or pulley puller. However, if the bearings are tightly pressed onto the shaft, removal may cause damage. To minimize this risk, we recommend replacing old bearings with our greased and sealed bearings, designed for long-lasting performance. For a smooth upgrade, we suggest adding the bearings to your shopping cart before completing your purchase.
We provide premium bearings from NSK, SKF, NTN, FAG, Timken. They are renowned for their high quality and performance, designed to provide durability and reliability in various applications
If you add the bearings to your order, we will preinstall them for you when premounting is possible, saving you the hassle of doing it yourself.
Do I need to to Add a Few Boxes of Carbide Inserts
We provide 5 carbide inserts and 5 screws as spare parts. However, many of our customers choose to purchase additional boxes, as the shipping costs for separate purchases can make it less economical.
Do I need a Torque Wrench?
To securely lock the carbide inserts, we recommend applying a torque of 48 to 52 Pound-Inches (or 5.42 to 5.88 Newton-Meters). (Note: 1 Newton-Meter is equal to 8.851 Pound-Inches, and 1 Pound-Inch is approximately 0.113 Newton-Meters.) It is crucial not to apply excessive torque, as this could cause the carbide inserts to crack or explode. On the other hand, using too little torque may result in the inserts not being properly secured, which could lead to cracks, shattering, or uneven height on the cutter block, causing ridges or lines on the board.
If one person is responsible for maintaining the machine, they can typically apply the same torque consistently without a torque wrench. However, when multiple people are involved in machine maintenance, ensuring uniform torque application can be challenging. For consistency and peace of mind, we recommend using a torque wrench.
What kind of steel the cutter block is made of?
The cutter block is constructed using GB/T 40Cr, a structural alloy steel of the same caliber as ASTM grade 5140, AISI 5140, SAE 5140, DIN 41Cr4, BS 41Cr4, JIS SCr440, and EN 41Cr4.The primary components of this steel are as follows: carbon (C) at a range of 0.37-0.44%, silicon (Si) between 0.17-0.37%, manganese (Mn) within 0.50-0.80%, and chromium (Cr) from 0.80-1.10%.
In terms of physical properties, this steel exhibits a tensile strength range of 115-234σb/MPa, a yield strength of 2σ 0.2 ≥/MPa, and an elongation capacity of 65 δ5≥ (%). It also has a HBS range of 123-321 and a HRC rating of 30.
This alloy steel is frequently utilized in low to moderately stressed components for machines, engines, and vehicles.
