Sheartak Spiral Cutterhead for John Ballantine 12" Jointer comes with a total 104 carbide inserts on 6 spirals. 5 extra carbide inserts and 5 screws are provided as spare parts.
Sheartak spiral cutterhead leave superior surface finish over stright-edge cutterheads. The round-edged inserts are angled for shear-cut that leaves glassy smooth cut even on the highly figured woods or very soft wood. Each insert has four cutting edges and can be rotated up to 3 times to reveal a fresh sharp edge. No more sharpening and resetting when a insert gets dull or nicked. Carbide inserts stay sharp 50 times longer than HSS blades. Dust extraction is much easier with the shorter and thinner chips cut by Sheartak spiral cutterheads.
All our cutterheads are warranted one year from date of purchase, which covers parts and assures it is free from manufacturer defects. ( Consumables are not covered)
Specifications
Material of Cutterblock: AISI 5140 high tensile strength alloy steel
Material of insert: Grade C3++.
Carbide insert size: 15x15x2.5mm R150
Number of inserts: 104
Number of rows: 8
Wrench size: Torx head T type
* All carbide inserts installed.
* 5 extra carbide inserts
* 5 extra Torx screws
* 1 T-handle wrench
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 8 |
No. of Carbide Inserts | 104 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | M6X1 |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |