Improve your Luna BPT 260 Planer Thicknesser by equipping it with Sheartak spiral cutterheads, which offer several advantages:
1)Achieve a superior finish with zero tear-out. The inserts on the cutterheads are arranged in a staggered manner and angled along the helical, resulting in a shear-cut effect on even highly figured hardwood.
2)Significantly reduce noise as the spiral cutterhead maintains continuous contact with the board using only a few knives.
3)Utilize solid tungsten carbide cutters that are much harder and stay sharp longer than high-speed steel blades. If one edge becomes dull or chipped, simply rotate it 90° for a fresh, sharp edge. Each insert has four cutting edges and can be used up to four times.
4)Enjoy easy setup with precision-ground, interchangeable indexable carbide inserts that have a tight tolerance. You can loosen the screws, rotate the inserts 90°, and tighten them in just minutes. The inserts can be accurately positioned using the taper hole locking system.
5)Remove shorter and thinner materials with smaller carbide inserts, which makes dust extraction easier.
6)Over the long term, spiral cutterheads are more cost-effective and can pay for themselves in a short period.
Spiral Cutterhead Kit includes:
* High tensile strength alloy steel cutter block.
* 48 carbide inserts installed.
* 5 extra carbide inserts & 5 extra screws free as spare parts.
* 1 Wrench
Ask Question About Product
Technical | |
No. of Spirals | 4 |
No. of Carbide Inserts | 48 |
Carbide Insert Size | 15x15x2.5mm R150 |
Screw Size | T25 head 10#-32UNF |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |