DEWALT D26676 3-1/4" Corded Hand Planer with Sheartak Helical Cutterhead Installed

DEWALT D26676 3-1/4" Corded Hand Planer with Sheartak Helical Cutterhead Installed

Enjoy the convenience of a brand-new DEWALT D26676 hand planer upgraded by Sheartak with a pre-installed helical cutterhead and 14 indexable carbide inserts. This complete planer combines DEWALT’s 5.5-amp motor with Sheartak’s cutting technology for a smoother finish, reduced tear-out, and easier cutter maintenance.

Ideal for trimming doors, fitting timber, smoothing edges, and general woodworking, this upgraded planer arrives with the cutterhead already installed—saving you the work of converting the machine yourself.

Sheartak Helical Cutterhead Features

• Smoother finish with less tear-out: Staggered, angled carbide inserts provide a shearing action that helps produce clean surfaces, including on challenging grain.

• Reduced cutting noise: Progressive engagement of the inserts helps reduce cutting noise compared with conventional straight blades.

• Long-lasting carbide edges: Tungsten carbide inserts stay sharp longer than traditional high-speed steel blades.

• Four cutting edges per insert: When an edge becomes dull or chipped, rotate the insert 90° to expose a fresh edge.

• Simple maintenance: Replace individual damaged inserts instead of replacing an entire full-width blade. No blade sharpening is required.

• Smaller wood chips: The staggered cutting pattern produces shorter chips that are easier to manage.

• Lightweight cutterhead body: The hard-aluminium construction helps limit rotating weight.

DEWALT Planer Features

• Powerful 5.5-amp motor for everyday planing and edge-trimming tasks.

• 296 mm machined aluminium shoe for stable guidance and a consistent finish.

• Large depth-adjustment knob with 0.1 mm graduations for precise settings.

• Ergonomic handle with a finger rest for comfortable control and balance.

Specifications

Package Includes

• (1) DEWALT D26676 3-1/4" corded hand planer

• (1) Sheartak helical cutterhead, installed

• (14) Indexable carbide inserts, installed

• (1) Rabbeting fence

• (1) Blade depth-setting gauge

• (1) Torx T25 wrench

Do I need to replace the original bearings?
If the bearings in your machine are in good condition, they can be reused by carefully removing them with a bearing or pulley puller. However, if the bearings are tightly pressed onto the shaft, removal may cause damage. To minimize this risk, we recommend replacing old bearings with our greased and sealed bearings, designed for long-lasting performance. For a smooth upgrade, we suggest adding the bearings to your shopping cart before completing your purchase.
We provide premium bearings from NSK, SKF, NTN, FAG, Timken. They are renowned for their high quality and performance, designed to provide durability and reliability in various applications

Do I need to to Add a Few Boxes of Carbide Inserts
We provide 5 carbide inserts and 5 screws as spare parts. However, many of our customers choose to purchase additional boxes, as the shipping costs for separate purchases can make it less economical.

Do I need a Torque Wrench?
To securely lock the carbide inserts, we recommend applying a torque of 48 to 52 Pound-Inches (or 5.42 to 5.88 Newton-Meters). (Note: 1 Newton-Meter is equal to 8.851 Pound-Inches, and 1 Pound-Inch is approximately 0.113 Newton-Meters.) It is crucial not to apply excessive torque, as this could cause the carbide inserts to crack or explode. On the other hand, using too little torque may result in the inserts not being properly secured, which could lead to cracks, shattering, or uneven height on the cutter block, causing ridges or lines on the board.
If one person is responsible for maintaining the machine, they can typically apply the same torque consistently without a torque wrench. However, when multiple people are involved in machine maintenance, ensuring uniform torque application can be challenging. For consistency and peace of mind, we recommend using a torque wrench.

What kind of steel the cutter block is made of?
The cutter block is constructed using GB/T 40Cr, a structural alloy steel of the same caliber as ASTM grade 5140, AISI 5140, SAE 5140, DIN 41Cr4, BS 41Cr4, JIS SCr440, and EN 41Cr4.The primary components of this steel are as follows: carbon (C) at a range of 0.37-0.44%, silicon (Si) between 0.17-0.37%, manganese (Mn) within 0.50-0.80%, and chromium (Cr) from 0.80-1.10%.
In terms of physical properties, this steel exhibits a tensile strength range of 115-234σb/MPa, a yield strength of 2σ 0.2 ≥/MPa, and an elongation capacity of 65 δ5≥ (%). It also has a HBS range of 123-321 and a HRC rating of 30.
This alloy steel is frequently utilized in low to moderately stressed components for machines, engines, and vehicles.