Replacement Indexable Carbide Insert 14x14x2mm - 10 Pack Compatible with Grizzly H7319
Keep your Grizzly woodworking tools performing at their best with the replacement carbide inserts which are compatible with original H7319.
Each pack includes ten 14 x 14 x 2mm inserts, a handy addition to keep your woodworking equipment running smoothly.
Made from durable carbide, these inserts offer significantly longer edge retention than traditional high-speed steel, reducing downtime and maintenance.
Installation is quick and easy—simply rotate the insert to a fresh edge when it becomes dull or damaged.
Specifications:
- 14x14x2mm
- Four cutting edges
- 30° degree angle
- Standard taper hole
Fits:
G0452Z 6" Jointer
G0453PX 15" Planer
G0453Z 15" Planer
G0453ZW 15" Planer
G0454Z 20" Planer
G0454ZW 20" Planer
G0480 10" Jointer
G0490X 8" Jointer
G0490XW 8" Jointer
G0526 6" Jointer
G0543 8" Jointer
G0544 20" Planer
G0546 20" Shop Fox Planer
G0593 8" Jointer
G0604ZX 6" Jointer
G0609X 12" Jointer
G0634 12" Planer/Jointer
G0656PX 8" Jointer
G0656X 8" Jointer
G0656XW 8" Jointer
G0706 12" Jointer
G1021X 15" Planer
G1033X V1 20" Planer
G1033ZX 20" Planer
G4815 20" Jointer
G9740Z 20" Planer
G9859Z 8" Z-Series Jointer
G9860ZX 12" Z-Series Jointer
G9953ZX 16" Z-Series Jointer
G9953ZXF 16" Z-Series Jointer
G9961 24" Planer
G9967Z 20" Planer
H7653 6" Spiral Cutterhead
W1705 8" Jointer
W1718 20" Planer
W1741S 8" Jointer
W1741SW 8" Jointer
W1742S 15" Planer
W1742SW 15" Planer
W1744S 12" Jointer
W1754S 20" Planer
W1754SW 20" Planer
W1755S 6" Jointer
Do I need to replace the original bearings?
If the bearings in your machine are in good condition, they can be reused by carefully removing them with a bearing or pulley puller. However, if the bearings are tightly pressed onto the shaft, removal may cause damage. To minimize this risk, we recommend replacing old bearings with our greased and sealed bearings, designed for long-lasting performance. For a smooth upgrade, we suggest adding the bearings to your shopping cart before completing your purchase.
We provide premium bearings from NSK, SKF, NTN, FAG, Timken. They are renowned for their high quality and performance, designed to provide durability and reliability in various applications
If you add the bearings to your order, we will preinstall them for you when premounting is possible, saving you the hassle of doing it yourself.
Do I need to to Add a Few Boxes of Carbide Inserts
We provide 5 carbide inserts and 5 screws as spare parts. However, many of our customers choose to purchase additional boxes, as the shipping costs for separate purchases can make it less economical.
Do I need a Torque Wrench?
To securely lock the carbide inserts, we recommend applying a torque of 48 to 52 Pound-Inches (or 5.42 to 5.88 Newton-Meters). (Note: 1 Newton-Meter is equal to 8.851 Pound-Inches, and 1 Pound-Inch is approximately 0.113 Newton-Meters.) It is crucial not to apply excessive torque, as this could cause the carbide inserts to crack or explode. On the other hand, using too little torque may result in the inserts not being properly secured, which could lead to cracks, shattering, or uneven height on the cutter block, causing ridges or lines on the board.
If one person is responsible for maintaining the machine, they can typically apply the same torque consistently without a torque wrench. However, when multiple people are involved in machine maintenance, ensuring uniform torque application can be challenging. For consistency and peace of mind, we recommend using a torque wrench.
What kind of steel the cutter block is made of?
The cutter block is constructed using GB/T 40Cr, a structural alloy steel of the same caliber as ASTM grade 5140, AISI 5140, SAE 5140, DIN 41Cr4, BS 41Cr4, JIS SCr440, and EN 41Cr4.The primary components of this steel are as follows: carbon (C) at a range of 0.37-0.44%, silicon (Si) between 0.17-0.37%, manganese (Mn) within 0.50-0.80%, and chromium (Cr) from 0.80-1.10%.
In terms of physical properties, this steel exhibits a tensile strength range of 115-234σb/MPa, a yield strength of 2σ 0.2 ≥/MPa, and an elongation capacity of 65 δ5≥ (%). It also has a HBS range of 123-321 and a HRC rating of 30.
This alloy steel is frequently utilized in low to moderately stressed components for machines, engines, and vehicles.
