Spiral Cutterhead for Dewalt DW1163 Planer Thicknesser is equipped with 48 carbide inserts on 4 spirals. Each carbide insert has 4 round edges. The inserts are installed in a staggered way along helical grooves which wrap around the cutter block made of high tensile strength alloy steel, heated for long durability. The inserts remove strips of a board in a shearing way, which leaves a good quality finish even against grains on softwood, hardwood, and artificial boards.
Huge noise reduction is another significant benefit. The inexpensive carbide inserts can be rotated 3 times for factory-sharp cutting edges. Only replace the inserts when all four edges are affected. The carbide inserts are of tight tolerance and are indexable. It's easy to change. You avoid the hassle of sharpening. The life span of carbide inserts is about fifty times of the expensive straight steel blades. Reduced downtime and sanding work improve your outcome and bring more value. A staggered cut reduces power consumption. And you don't need to worry about the annoying clog of dust extraction any longer as the Sheartak spiral cutter head slices short strips of materials.
Helical Cutterhead for Dewalt DW1163 Planer Thicknesser Kit includes:
* High tensile strength alloy steel cutter block.
* 48 carbide inserts installed.
* 5 extra carbide inserts.
* 5 extra screws.
* 1-year warranty for cutter block.
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 4 |
No. of Carbide Inserts | 48 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |