Upgrade your GEE-TECH CT-200 8" Jointer with the Sheartak Spiral Cutter head, which boasts 40 carbide inserts on 5 spirals, to enjoy a range of benefits.
* The Sheartak Spiral Cutter head produces a smoother finish with no tear-out. Each knife is angled to produce a shear cut, resulting in a staggered cut pattern that is much more effective than a single straight cut. This combined approach eliminates tear-out and produces a glossy surface finish, even on highly figured hardwood.
* The Sheartak Spiral Cutter head significantly reduces noise levels, as only a few knives cut at a time in a staggered manner.
* The sintered tungsten carbide inserts are much harder than high-speed steel and have four edges, lasting over 10 times longer than their steel counterparts. This eliminates the need for frequent sharpening, resulting in significant cost savings.
* Changing the interchangeable knives is a breeze. The knives are precision ground to a tolerance of +/-0.0004" or +/-0.01mm, and can be loosened with a screw, rotated 90° for a new edge, and re-tightened in minutes. This process saves up to 30% of production time.
* The Sheartak Spiral Cutter head produces thinner and shorter chips, making dust extraction easier.
* The low cost of use is another significant advantage, as the Sheartak Spiral Cutter head eliminates or significantly reduces the need for sanding work. This means that the product will pay for itself in a short time.
* 40 carbide inserts installed.
* 5 extra carbide inserts
* 5 extra Torx screws
* 1 T-handle wrench
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 6 |
No. of Carbide Inserts | 52 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |