Upgrade your SAC 12" Jointer FS-305 by installing Sheartak spiral cutterheads to enjoy a host of benefits. With 78 carbide inserts situated along six spirals, each boasting four indexable edges, the cutterhead is designed to produce a shear cut that eliminates tear-out, leaving behind a glossy surface finish on softwood, hardwood, and man-made board. The carbide inserts are also slightly angled to the board feeding, further enhancing the quality of the cut. Noise levels are significantly reduced during operation, and when a carbide insert is dull or chipped, simply rotate it 90 degrees to expose a new, sharp edge. Inexpensive and disposable, these carbide inserts only need to be replaced when all four edges have been affected, eliminating the need for sharpening and reducing downtime. Sheartak spiral cutterheads can also help to reduce sanding work by up to three-quarters and consume less power, while their staggered chip removal ensures dust extraction is significantly improved, avoiding clogs at the hood port. Investing in Sheartak spiral cutterheads can quickly pay for itself with the savings you'll enjoy in reduced maintenance and increased efficiency.
Spiral Cutterhead Kit includes:
* High tensile strength alloy steel cutter block.
* 78 carbide inserts installed.
* 5 extra carbide inserts.
* 5 extra screws.
* 1 Wrench
* 1-year warranty for cutter block.
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 6 |
No. of Carbide Inserts | 78 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |