Upgrade your Delta 6" Variable Speed Bench Jointer JT160 with Sheartak Helical Head, which contains 20 carbide inserts. Each insert features four R150 round edges and is situated at a slight angle to the board feed, providing a true shear-cut that eliminates tear-out and results in a glossy surface finish on any type of wood, regardless of grain direction. The staggered cutting action of the inserts greatly reduces noise compared to traditional straight blades, as they only cut a small portion of the 15mm length at a time. When an edge becomes dull or chipped, it can be quickly and easily rotated to reveal a new, sharp edge without the need to replace the entire insert. Only replace inserts when all four edges have been used. This significantly reduces downtime, as the carbide inserts are readily available and inexpensive. Additionally, the use of carbide inserts reduces the amount of sanding required by up to three-quarters, and they have a lifespan that is 50 times longer than high-speed steel blades. The Sheartak Helical Head also consumes less power than conventional cutter heads, making retrofitting more cost-effective. The spiral cutting action produces short strips of wood, which makes dust extraction easier and prevents clogging at the hood, even if the dust collector is not powerful or well-designed. By upgrading to the Sheartak Helical Head, you can expect a quick return on your investment.
Kit includes:
* High tensile strength alloy steel cutter block.
* 20 carbide inserts installed.
* 5 extra carbide inserts.
* 5 extra screws.
Ask Question About Product
| Technical | |
| Material of Cutterblock | Alloy Steel |
| No. of Spirals | 4 |
| No. of Carbide Inserts | 20 |
| Carbide Insert Size | 15x15x2.5mm R150 30° |
| Screw Size | T25 10#-32TPI |
| Standard Kit | |
| No. of Additional Knives | 5 |
| No. of Additional Screws | 5 |
| No. of Wrenches | 1 |
