Sheartak Spiral Cutterhead designed for the Dewalt Planer DCP580, equipped with 14 Indexable Carbide Inserts, offers a host of benefits:
Enhanced Surface Finish: Utilizing a slight angle for each knife, the cutterhead delivers a shear cut, resulting in a smoother finish without any tear-out. Its staggered cutting pattern surpasses the quality of a single straight cut, leaving behind a glossy surface even on intricately figured hardwood.
Reduced Noise: The spiral design minimizes noise by allowing a few knives to cut in a staggered manner, resulting in quieter operation.
Extended Lifespan: Featuring 15x15x2.5mm inserts crafted from sintered tungsten carbide, the cutterhead offers over ten times the longevity of high-speed steel. Each insert boasts four edges, ensuring prolonged usage.
Easy Replacement: Precision-ground knives, with a tolerance of +/-0.0004" or +/-0.01mm, are effortlessly interchangeable. Simply loosen the screw, rotate 90° for a fresh edge, and secure the insert within minutes.
Improved Dust Extraction: Thinner and shorter chips produced by the spiral cutterhead facilitate easier dust extraction, maintaining a cleaner work environment.
Cost-Efficient Operation: With its ability to produce a superior finish, reduce or eliminate the need for sanding, and negate the necessity for sharpening, the spiral cutterhead offers a low-cost solution. The product's efficiency ensures rapid cost recovery, making it a wise investment for any workshop.
* 14 carbide inserts installed.
* 5 extra carbide inserts
* 5 extra Torx screws
* A pair of premium bearings
* 1 T-handle wrench
Ask Question About Product
Note: HTML is not translated!
| Technical | |
| Material of Cutterblock | Alloy Steel |
| No. of Spirals | 4 |
| No. of Carbide Inserts | 14PCS |
| Carbide Insert Size | 15x15x2.5mm R150 30° |
| Screw Size | T25 10#-32TPI |
| Standard Kit | |
| No. of Additional Knives | 5 |
| No. of Additional Screws | 5 |
| No. of Wrenches | 1 |
| No. of Bearings | 2 |
